New Stainless Steel Flange Block available from FTL TECHNOLOGY, is Suitable for
Wet or Submersible Applications
A new series of GRAPHALLOY® self-lubricating bushings mounted in stainless steel
flange blocks is now available from FTL TECHNOLOGY. The new series combines the
corrosion resistant and self-lubricating properties of GRAPHALLOY® with the
application and installation versatility of a flange block.
These Stainless Steel Flange Blocks are available in 2-bolt and 4-bolt
configurations, come in a wide range of base dimensions, and can accommodate
shaft diameters from .5" (12.7 mm) to 3.75" (95.2 mm). And are suitable for
temperatures of 750°F/399°C and above in non-oxidizing environments or with
oxidation -resistant grades.
 Stainless Steel Flange
Blocks provide increased reliability and years of trouble-free operation. These
flange blocks deliver lifetime cost and operating advantages in high temperature
ovens, low speed and stationary applications such as dampers, and other hard to
lubricate environments - all places where other bushings will not work.
GRAPHALLOY®, a graphite/metal alloy, is graphite impregnated with metal to
enhance the chemical, mechanical and tribological properties of the material.
The material, most commonly used in bushings, is available in over 100 grades
and can be designed to fit a variety of machinery.
Further Information
For advice in a wide range of applications involving Duo-Cone seals, contact:
tonys@ftltech.co.uk or on Tel No. 0113
220 3403
|